How to lay Floor Tile

In the making and decoration of a house, many different factors play an essential role, and one among those factors is the tiles of our house. Thus, it means that tiles play a necessary role in providing look and strength to the floor. Therefore, on that note today we will discuss the same topic that how to lay floor tiles efficiently to strengthen the floor and augment the overall look of the room or the house. If you are looking for the latest trends, you must log on to loews.com.

So here we start:-

Materials:-

  1. Tile
  2. Grout (Grout By Red Devil)
  3. Sealer
  4. Patching compound (Elastomeric Patch and Caulking Compound by DAP)
  5. Thin-Set Mortar (Adhesive)

FloorPops FP2477 Fontaine Peel & Stick Tiles Floor Decal, Blue

BUY ON AMAZON

Tools:-

  1. Pencil
  2. Tape
  3. Spirit Level (3-piece Torpedo Spirit Level Set by Goldblatt)
  4. Goggles
  5. Grout Sponge (70005Q-6D 7.5 Inch x 5.5 Inch x 1.875 Inch Grouting, Cleaning and Washing Sponge by QEP)
  6. Notched Trowel (Premium Square Notch by M-D Building Products)
  7. Tile Cutter
  8. Tile spacer
  9. Rubber Mallet

1. Prepare Your Surface

The very first step in the process of laying a new tile floor includes preparing your surface or floor. In this process, all you have to do is to clean and dry your floor thereby removing existing residual left after removing the previous flooring. Along with that also don’t forget to fill in cracks in subfloor if there are any with the help of concrete patching compound if you have a concrete subfloor. Use Simple Green 18202 Concrete and Driveway Cleaner to clean that you can get from Amazon.com. 

Simple Green 73434010 14010 Industrial Cleaner & Degreaser, Concentrated, Lemon, 1 gal Bottle

BUY ON AMAZON

2. Make your Datum Line

After preparing the floor, the next step includes making your datum line. Datum line is a reference line which is created to lay the tiles on the floor in a symmetrical and straight manner. For the same to make you will need a pencil, tape and a spirit level. With the help of the datum line, you will be able to place the tile on the side of the line and after that on the edges of the area to be tiled.

3. Lay Your Tiles Dry For aLook Test

Once you are done with the making your datum line, the next step in floor tile installation includes dry lying of your tiles. By dry lay of your tiles, you will get an idea of their completed look. So to achieve the same dry lay your tiles on the surface, considering datum line as a reference. At this point, check if the tiles are equidistant from each side of the wall. If the tiles are not then you need to amend your datum line. However, make sure that the tiles are either straight or tilting towards the intended direction. You can get state of the art bubble + digital Wixey from Walmart and check it with the said leveler. 

Wixey Digital Angle Gauge Type 2 with Magnetic Base and Backlight

BUY ON AMAZON

4. Make Adhesive for Tiles

The next step in how to tile a floor segment is the making of adhesive for tiles. In this step, you have to take an empty bucket and have to add water and powdered adhesive mix. You have to mix both in such a quantity that neither mixture becomes too thick or too runny. All you have to keep in mind that you have to make a mix same as of the consistency of toothpaste.

Along with that, the point which you have to keep in mind is that you have to make an amount of mixture which gets finished in 15-20 minutes. It is because it gets set very soon. Also, don’t forget to carry a bucket of fresh water and sponge to clean the tools and also to clear excess adhesive before its settlement. Get some of the best adhesive mix like the Dap 25190 Weldwood Multi-Purpose Ceramic Tile Adhesive, 1-Quart from Amazon.com. 

Dap 25190 Weldwood Multi-Purpose Ceramic Tile Adhesive, 1-Quart

BUY ON AMAZON

5. Start to Lay Tiles

As soon as you have prepared the adhesive the next step includes the laying of floor tiles with the help of adhesive you have just made. All you have to do is to smear the adhesive amid the nearby wall and datum line with the help of trowel, and after that, by using the same trowel’s notched side, you have to spread out the adhesive so that the surface area of adhesive gets increased where you have to fix your tile.  Past this, apply the same adhesive to the bottom side of the tile which is running along the datum line and then place the first tile and press it to fix it gently.

6. Put the tile spacers

Once you are done with lying of tiles in a row,put in tile spacers between each of them. It will help you to provide a professional look, even grout lines, uniformity of tiles, and faster turnaround as tile spacers make you capable of working quick as they eradicate the guesswork in tile positioning. You have to use spacers in such a way that it comes on each side of the large tile. Also, don’t forget to use these spacers amid all the tiles you lay. As soon as you have finished a work section, utilize a rubber mallet and carpenter’s level to level the tile.

7. Cut your tiles to size

Before cutting tiles in size, equip yourself with safety types of equipment like safety goggles and a dust mask to avoid any injury as it is a dusty task which involves dust and fragments of tiles too.

Next, to this calculate the distance amid the laid tile and the wall on the duo ends of the tile to confirm that the tile is square to the wall. Label this distance on duo ends of a new tile and depict a line amid them. Put the tile in the tile cutter and drive the blade all along the line. Then force down to split the tile all along the line and place it in the adhesive. Reiterate this procedure when cutting and measuring all your tiles.

8. Apply and Seal the Grout

Once you are done with all the points mentioned above and your tiles are all set, fill the joints with the grout. So for that – filling process, first of all, clean all the joints of the tiles to remove any dust or debris present and then mix up the grout and water (in recommended amount) in a bucket with the help of power drill and mixing paddle. After that permit it to sit for 5-12 minutes and then whisk again. A number of concrete DIY tools are available as off the shelf solution that you can easily get from HomeDepot.

Next, to this application the prepared grout in joints with a rubber float thereby making an angle of 45 degrees across the joints. Permit the grout to set for some minutes, and then remove any surplus utilizing bucket of clean water and a sponge. As soon as the grout has toughened for the suggested time, apply sealer to the joints using a foam brush or applicator bottle.

Total Page Visits: 456 - Today Page Visits: 1
HOUSENER
Enable registration in settings - general