Table of Contents
Cordless drills have been in the rage ever since they were launched. These are just as powerful tools as the corresponding tools with code but with additional benefits—no need to plug while working.
As a result, cordless drills were popular not only among professionals but also among enthusiasts. However, these drills have one major drawback.
Batteries need to be recharged regularly, and the worst part is that they eventually drain.
Usually, when the battery packs that came with your new drill run out, you have to buy them yourself.
And in most cases, the price of a new battery pack is so close to the price of a new corded drill that it will often eventually switch to a conventional drill.
If you’re tired of buying a new battery pack or don’t want to invest in a new battery, you can turn your cordless drill into a corded drill.
Why throw away valuable and helpful tools when you can use them with some adjustments? This isn’t an easy task, but it’s not rocket science.
With a few things and a little work, you can get your favorite cordless drill back to work, but this time it’s a corded drill.
This is a comprehensive guide on how to convert a cordless drill into a corded drill.
What do you want to know before converting cordless drill to corded
As mentioned earlier, this is not a skilled job. To turn a drill into a corded drill, you need to know a few things.
This is the first and most important skill you need.
To convert the cordless drill into a corded drill, you must be able to solder your cord’s wire to your cordless drill’s battery connector.
This requires knowledge of the soldering iron and other accessories that are needed at the time of soldering.
This procedure is very important because, without proper soldering, the drill will not work.
Converting drills also require a basic idea of the devices, how they work and how they work.
This is because you need to work with cables and connectors and know what goes where.
Without this knowledge, it is impossible to deform the drill. It is essential to have a clear idea of these things.
Without knowledge of connections and wiring, electrical work can be dangerous. So if you’ve never done electrical work before, that’s probably not the case.
Things you need
A few things are needed to complete the task. Have them at hand before you begin the conversion.
- Your drill
- Wall wart
- Soldering tools
- Wire stripper
- Wire cutter
Once you have the skills you need to transform your cordless drill and everything is ready, you can start the process.
There are many ways to do this, but we recommend using the simple method if you have limited knowledge of electrical work.
This should get your job done with very little effort. If you do not have a clear idea of what you are doing, you will be safe from electrical accidents that may occur.
Here is a very easy way to transform your cordless drill.
Get the drill ready
The first thing you should do is make sure all power supplies are turned off and unplugged.
Next, you need to open the drill casing. You need to open the drill casing to access the battery clips and cables.
Please note that the product warranty will be void at this point. Therefore, once the enclosure is opened, it cannot be changed.
When the casing is opened, you need to determine which is the wire. This should be done with both the drill and the power supply.
Connect the cord
To do this, you must strip and tin the end of the wire coming out of the power cord.
This allows it to be soldered to the battery connector.
You should also prepare the battery connector by polishing, tinning, and fluxing. You can also disconnect the battery if you want.
In this case, the wire must be soldered directly to the drill wire.
Solder the wire
This step improves your soldering skills. Unplug the cord from the power cord and solder it with the battery clip inside.
If you disconnect the battery as described above, you can directly sell the power cord wire to the drill wire.
This will create a direct link. Required link. The drill is now connected to the power cord and acts like a corded drill.
Note: If you are not familiar with the electrical work, you may solder the wrong wire.
In this case, the drill may not work. Don’t worry, just take out the wire and solder the right one.
You may click here: How To Change A Drill Bit On A Ryobi Drill | Guide
Converting a cordless drill into a corded drill is not a difficult task and is the best way to continue using powerful tools without spending a lot of money on battery packs.
However, if you are entirely new to soldering and electrical work, it’s best to have some knowledge and experience before converting a drill.
This helps prevent accidents and accidents.
If you think this is outside of your comfort zone, buy a cheap product that won’t hurt your pocket