House Pro
  Online
  Back River Neck, Essex, MD 21221, USA
Contact:   Mack
   Chat

How to Perform Home Energy Audit

Tags 
  0     0     70

When it comes to the time of home energy audit, people usually believe that this is the task that can only be performed by a professional and that is why it has often been delayed as hiring an expert will definitely cost them extra. While on the other hand, with some little effort, adoption of smart techniques and getting help from the guides related to the energy audits, you can easily get to know, how to perform a home energy audit yourself. So, this post is all about teaching you some very simple practices that will be helpful to you in accomplishing a good sense of leakages, your selection of the appliances and the utilization of the energy that adds up to the loss of energy.

Things Often Required For Do-It-Yourself Home Energy Audit

Let us start off with the list of the equipment that you will require in order to conduct a home energy audit.

  • A flashlight
  • Ladder
  • Measuring stick
  • Candles or incense sticks
  • Screwdriver
  • Eye protection
  • Work clothes
  • Dust mask

What should be checked around the house?

Well, mainly you need to have a closer look at the entire home system, and the appliances present inside your house that contributes to the energy cost. For instance;

  • Heating and cooling arrangements
  • Lighting
  • Home appliances
  • Computer electronics, etc.

How to Perform Home Energy Audit

Let us look at the most significant pointers that will guide you through performing a home energy audit quite conveniently and efficiently.

Here we go!!

Watch for the air leakages:

When it comes to looking out for the air leakages, this task has to be performed both inside and outside of your house.

For indoors, check for the edges of the floors, the spaces along the baseboards or the junctures of the walls and ceilings. Furthermore, inspect vents, switches, electrical outlets, plumbing fixtures as well as the doors and windows frame. What you have to do is to close all the exterior openings and ignite incense stick. Take it near to the common and the most expected leak points. Wherever the smoke flickers, mark that area. Once spotted, you need to seal all the cracks and holes using caulk or other suitable material.

As for the outdoors, examine the areas where two different building materials are joined together. This is where you usually find the air leakage problems.

Check insulation:

When your house was constructed, your builder must have installed the recommended volume of insulation of that time. The correct amount and the proper fixing surely reduce the heating and cooling costs. However, the level of insulation becomes insufficient and poor with the passage of time. So, grab a flashlight and a measuring tape and head towards your attic. Measure the depth of the insulation and calculate the R-value. If the results showcase the lower value than what is recommended, then you are definitely losing energy. Add more insulation to sort out the problem.

Keep track of your heating and cooling equipment:

It is highly advisable to get your heating and cooling systems checked annually. Generally, the filters should be changed after every month or two that enhances their productivity.

Moreover, if your unit is pretty old, we suggest you change it and switch to the new smart technologies that are energy-efficient and remain low on your budget.

Examine lighting in the house:

Take a quick round in the house and look for the bulbs that are inefficient. How about replacing them with the new energy saving light bulbs? Installation of these bulbs remains light on your utility bills.

Moreover, with the rapid progressions and the introduction of smart home technology devices, now you may find the light bulbs and lamps integrated with smart sensors, timers, and dimmers that proficiently manage the usage of the lighting in the house.

Pinpoint the energy hulks (Electronics):

Well, it is a very common practice in our houses that we keep our appliances on the standby modes. However, this does not mean that the machine is totally powered off and thus it continues to consume the energy. Therefore, always turn them off completely. So, while performing your home energy audit, do consider examining the energy hulks as well which include the following:

  • DVRs
  • Gaming consoles
  • Speakers and printers
  • Chargers
  • Microwave
  • Coffeemaker
  • Other small kitchen appliances, etc.

Well, I hope that you have found this do-it-yourself home energy audit guide fruitful. Do not forget to leave your comments below.

Comments

You may like

No data available